NC 數控滾輪送料機   NC ROLL FEEDER

特性及構造 Features and construction ：

1、高精度的送料 ：針對高科技來臨，以電腦閉路式回授系統控制，使精度確保在±0.03MM以內

High-precision feeding：Aiming at the arrival of hi-tech industry it is controlled by computer closed-circuit feedback system.so that the precision can maintain within±0.3MM

2、階段式送料機能 ：可輸入20組不同的送料長度，每組提供999次沖壓次數，滿足特殊制品的加工生產（選配）

Phase-style feeding function:it can input 20 groups of different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products(option)

3、個性化的手動模式 ：可輸入適合的3段手動速度，讓使用者更容易操作，精確地使材料送近模具而定位

Manual model : it can input 3 phases manual speed,which can let used operate more easily and feed materials more accuracy.

4、高效率的放松裝置：配合沖床之凸輪訊號以及簡單之料厚調整，即可快速的設定放松角度

High-effciency release device:it can set up release angle quickly,only match Cam signal of and adjusted feed thickness can done.

5、送料長度的設定：在控制面板上，直接輸入送料長度，即可達到所需的送距

Feeding length setting: input feed length on the controller panel directly.

6、送料機構：滾輪采用中空式，重量輕，回轉慣性小，表面硬度HR60°鍍硬鉻，耐磨損，壽命長

Feeding unit:the roll adopts middle-hollow style,being light and with low intertia for electropiate.the surface hardness HRC60°and hard chorme plated.